With the engine directly over
the rear wheels a ZTR gets excellent traction without having
to install snow chains or grippers! The speed and manuverablity
of a ZTR cuts down on your mowing time, think what it will do
plowing snow! Tough enough to be used for pushing dirt, sand
and gravel with ease.
ZTR (zero turn radius) mowers have
proven to be one of the best time savers in the past few years,
but why let that expensive mower sit idle during the off-season?
ZTRs can also be used as a great platform for plowing snow! Country
ZTR has developed an inexpensive and simple Universal Mounting Bar to put that ZTR to work year around. With the speed and
manuverability of a ZTR, you can plow snow 3 times faster than
with a garden tractor or conventional snow blower! Tough enough
to be used to grade dirt, sand and gravel year around! NEW- ZTR
Quick Dump accessory! Haul tools, mulch, sand, gravel and dirt
right on your ZTR and dump it with ease. Check back often as
we are developing new ZTR attachments to be released soon.
Toll Free: 1-800-335-1880
Office Hours Monday-Friday 8:00 am - 5:00 pm EST.
FREE SHIPPING to a
residental address in the Continental U.S. 48 States
Universal Mounting Bar with 4 ft. snow
blade shown
The Universal Mounting Bar will fit all
makes of zero turn radius mowers. To operate, simply step on
the foot pedal to raise the snow plow, take your foot off the
pedal to lower the blade into position. No electric or hydraulics
needed! Our blades are tough enough to be used as small dozer
or grader blades during the warm weather months!
The heart of our design is the revolutionary
Universal Mounting Bar. This patent pending system makes
lifting and lowering the snow blade quick and easy by simply
pushing the foot pedal down or allowing it to return up by lifting
your foot. Fully adjustable, the Universal Mounting Bar can
be mounted on virtually any make and model of mid-mount zero
turn radius mowers available on the market today!
Installation of the Universal Mounting Bar can be done two ways.1: Clamp-on adapters are included
to secure the mounts to the ZTR frame or 2: You can drill 4 holes
in the front caster wheel support frame and install the pivot
brackets. The choice is yours. The design of the brackets allow
for the curves and angles found in the front frame of some makes
of ZTRs. Then simply adjust the Mounting Bar center frame to the
height and length you need, bolt in the snow plow and you are
ready to go! All of our snow blades are designed to be used in
3 angle positions and come with a replaceable edge and bottom
height adjusters.
Click the > button in
the bottom of the photo below to watch a 60 second video clip
A Zero Turn Mower Equipped with a 5 ft snow plow clearing a parking lot quickly and easily.
All rights reserved. No unauthorized
duplication of the photos or material on this web site without
the expressed written permission of Country ZTR Equipment
.
